YE Yalin, LIU Xingyan, ZHENG Qingsong, LIU Enlong, WANG Ning, CHEN Gong, LI Xin. 2026: Loading rate effect on fractured rock failure with varying connectivity. Journal of Mountain Science. DOI: 10.1007/s11629-026-0756-8
Citation: YE Yalin, LIU Xingyan, ZHENG Qingsong, LIU Enlong, WANG Ning, CHEN Gong, LI Xin. 2026: Loading rate effect on fractured rock failure with varying connectivity. Journal of Mountain Science. DOI: 10.1007/s11629-026-0756-8

Loading rate effect on fractured rock failure with varying connectivity

  • Jointed rock masses are ubiquitous in geotechnical engineering, and their mechanical behaviors exhibit significant sensitivity to loading rate. Engineering disturbances such as slope excavation, tunnel excavation, blasting vibration, and earthquakes often subject jointed rock masses to loads at different rates, thereby affecting their deformation and failure processes and engineering stability. Most existing studies only analyze the coupling effect of loading rate and joint dip angle, while research on the macro- and meso-scale failure mechanisms of rock masses under the combined action of loading rate and connectivity rate has not yet been conducted, nor has the quantitative relationship between macroscopic mechanical parameters and mesoscopic microcrack evolution been established. To investigate the effects of loading rate on the mechanical properties and failure behaviors of rock specimens with different connectivity rates, this paper systematically explores the macro- and meso-scale failure mechanisms of jointed rock specimens with four joint dip angles (15°, 30°, 45°, 60°) and four connectivity rates (0.25, 0.5, 0.75, 1.0) under four loading rates (0.005 mm/s, 0.01 mm/s, 0.02 mm/s, 0.05 mm/s) by means of uniaxial compression tests and particle flow (PFC) numerical simulations. The results show that: (1) The peak intensity and elastic modulus of rock specimens increase linearly with the increase in loading rate, and this strengthening effect is more significant under the conditions of high inclination and high connectivity rate. The maximum growth rate of peak strength reaches 47.8% under the condition of β=60° and k=1.0, which is far higher than 16.85% of the group with β=15° and k=0.25 (2) When the joint dip angle is 15° and 30°, the rock specimens are dominated by tensile failure, and the number and width of surface cracks in the failed rock specimens increase with the rise in loading rate; when the joint dip angle is 45° and 60°, shear failure occurs in the rock specimens, whose failure patterns are insensitive to the variation in loading rate. (3) At the mesoscale, the total number of microcracks increases with the loading rate. When the connectivity rate is less than 1.0, the rock sample is dominated by tensile microcracks, while when the connectivity rate is 1.0, the failure of the rock sample is dominated by shear microcracks. This study constructs a complete correlation between macroscopic mechanical characteristics and mesoscopic fracture evolution of rock masses under the coupling effect of loading rate and connectivity rate, which provides a solid theoretical basis for stability evaluation and geological disaster prevention of fractured rock mass engineering under quasi-static loading conditions.
  • loading

Catalog

    Turn off MathJax
    Article Contents

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return